How to Fix STOP: 0x00000124 Blue Screen of Death in WindowsNovember 5, 2018
- Pressing F2 during booting will lead you to the BIOS settings window.
- There, Find Advanced Chipset Features.
- Then, Find and disable Disable the C1E Enhanced Halt State.
Sometimes, Faulty drivers, viruses or any third-party services can cause BSOD error in windows. It also can be a bit hard to resolve those issue. However, I’ve prepared a few methods to fix STOP: 0x00000124 which is a common blue screen of death error for windows users.
This BSOD is an older problem that annoyed many windows XP, Vista, 7 or 8 users. In windows 10, users are also encountering the similar issue. Sometimes, The stop error 0x00000124 appears temporarily. It also can appear frequently and repeatedly. However, This error code 0x00000124 means any hardware problem on your PC. So, To resolve the actual problem, You will need to be a bit technical. However, When you encounter this problem, you may see the following message on the screen.
A problem has been detected, and Windows has been shut down to prevent damage to your computer.
The system encountered an uncorrectable hardware error.
*** STOP Error 0x00000124
However, Along with the main error code, you may see additional error codes like 0x00000000, 0x88218A18, 0xB2000040, 0x00000800 etc.
It is unclear which thing actually causes specific B.S.O.D errors. But, It is most likely a hardware or driver related issue. Sometimes, Unusual entries in the registry, third-party services etc. can also cause this problem.
How to Fix STOP: 0x00000124 BSOD in Windows 10/8/7:
You can’t apply any specific solution to repair this error. First of all, You will need to understand or guess which thing is actually causing this stop error 0x00000124. It will make easier to fix it. In most cases, This error appears after upgrading windows or any components or any changes in your computer. So, You can just undo the changes or take additional steps.
In most cases, This error appears after upgrading windows or any components or any changes in your computer. So, You can just undo the changes or take additional steps. However, Sometimes, It may appear without any noticeable changes in your PC.
Anyway, Here are some troubleshooting ideas to fix STOP: 0x00000124 error.
1. Update Windows:
If you can boot into windows, just go to settings > update & security and click on check for updates. Because Windows update may remove this error from your PC. If you are windows 8 or 7 user, you can simply go to control panel > system & security > windows update. Sometimes, You may not be able to login into windows. Because this BSOD appears before accessing windows desktop. In that case, You can boot into safe mode with networking and try to update windows to fix Stop error code 0x00000124.
2. Update Drivers:
Old drivers often cause performance issues in PC. These are also responsible for the various blue screen of death errors. So, You should update all drivers of your PC to avoid encountering this problem.
3. Clean Boot:
Clean boot makes sure you are not running any third-party services. So, Performing clean boot can help to understand if there is any third-party service that is causing stop: 0x00000124. You most likely won’t encounter this error in clean boot. You should enable third-party services one by one to identify which one was actually causing the problem. In most cases, Third-party antivirus programs are responsible for this error. So, Disabling antivirus program may help you.
4. Disable C1E Enhanced Halt State:
In some motherboard BIOS especially in Dell computers, You may find C1E Enhanced Halt State feature. Sometimes, Disabling it can fix BSOD error code 0x00000124. To do it –
Hopefully, You won’t experience that BSOD again after doing this.
5. Fix Registry Errors:
Unusual registry issues often cause blue screen problem. So, I suggest you repair registry errors to do it. Advanced SystemCare and CCleaner are two trusted tools to take care of your registries.
6. Fix Memory Problem:
It is also possible that you are encountering this error because of memory problem. So, To resolve STOP: 0x00000124, i like to suggest you to run memory diagnostic tool to repair memory issues.
You can scan your PC with a good antivirus and remove if there is any viruses. Sometimes, It may be helpful. However, The best alternative solution is analyzing dump file to fix BSOD. If it doesn’t work, you may restore your PC to the previous restore point or completely reset it.
Hopefully, These tips will be helpful to fix STOP: 0x00000124. Whatever, If you still encounter this problem, please do comment with additional details.